Distortion

Signal Path:
Input -> Filtered -> Distorted -> Blended -> Output

BOOST & PRE GAIN
Used to increase the level of the input signal. When ‘Boost’ is active it adds up with the ‘Pre Gain’ value. Depending on these two settings, a corresponding gain compensation is applied to reduce or increase the level of the distorted signal.

DISTORTION MODE
Use the big knob to select one of eleven different distortion modes with their own characteristics.

POST GAIN
Changes the level of blended signal, which is the combined result of the filtered and distorted signals.

INTENSITY
Intensity, in combination with Boost and Pre Gain, determines how much distortion is applied to the input signal.

FEEDBACK
Determines the polarity and magnitude of feedback within the distortion function.

TONE
Determines the frequency of the filtered input signal before distortion is applied.

BLEND
Determines the relative magnitude of the filtered and distorted signals which together comprise the blended signal.

MIX
Determines the relative magnitude of the blended and clean signals which together comprise the output signal.